Model ZP26C 16 head bottle blowing machine is a reliable,stable and high-yield machine that we strongly recommend. It is the best choice to produce borosilicate medicinal glass bottle,packing glass bottle for biopharming,Vaccine bottles and so on.

Model ZP26C 16 head bottle blowing machine Performance Feature

1.Part A,B use imported splitter. Compare to servo motor and gear, work station bisection is more precise,reliable and stable.

2.Part A collet uses Hawa chain and gear as transmission, which has high precision and low noise.

3.Uses high-end imported processing equipment and advanced technology. The tolerance of part A turnplate 16 equal parts is less than +/-0.03mm.

4.The tolerance of finished bottleneck is less than +/-0.1mm.

5.Then tolerance of bottle body height is less than +/-0.15mm.

6.When processing different diameter(8mm-32mm) glass tube with part a collet, we do not need to change claw and connect plate, and also do not need to readjust. It is timesaving and does not waste glass tube and fuel gas.

7.Bottleneck modeling uses mould wheel table. Bottleneck’s precision is high and the product consistency is good.

8.Part B collet’s body can go up and down, and it uses V-groove and high wear-resistant materials. It’s precision is high and it’s wear-resistant is good. Normally the product life is more than 10 years.

9.After improving, the set screw at the back of Part B collet will not go up and down as the sliding sleeve at the collet goes up and down. This improvement reduces the abrasion of collet back, which allows the consistency when the collet clamps bottle. This improvement also allows staff adjust with less time and produce with less time and materials, and it improves the yield.

10.The structure of whole machine is simple and reasonable. The maintenance is also simple and convenient.